Entries Tagged as 'Cone'

I’ve been really busy lately!

puerto-vallarta-dawn-copy.jpg

Well life has been very full for me in the past few weeks. I’m working like crazy at my regular job, early mornings, and even working on the weekend. Its not so bad though, because I’m doing stuff that is challenging and kinda fun. At the same time though some of it is pretty hard and requires tons of abstract thought and the type of problem solving required to integrate many conceptual components that only exist in my head (such is the life of a software designer). On top of all the work that pays the bills I’ve also been pretty wrapped up in exercising some of the new photo gear that I’ve received over the past couple of weeks.

Firstly I got a new lens (I’ve convinced myself that I needed to evaluate it). The Nikon 14-24 f/2.8 wide angle zoom lens is the newest and quite possibly the best wide angle lens available short of the legendary 21mm ZeissĀ  Distagon. The lens is rather large and heavy, and the front lens element is huge and bulbous. But it does take some pretty darned nice photos. I don’t have anything particularly worthwhile to show from it yet because I just haven’t been able to shoot without outside of my driveway, or in the house in the evenings. My initial batch of comparisons against my Nikon 12-24 f/4 show that the new 14-24 is very impressive in the corners (the weakest spot of the 12-24). In all likelihood I’ll wind up keeping this lens, even though it is so expensive and not quite as wide as the 12-24. The photo that I’ve included with this post is one of the few photos I’ve shot at 12mm that I would consider successful. At the time I was on a moving ship, so that along with the subject matter rendered the somewhat weak corners moot.

Part of the reason why I haven’t had as much time to shoot with the new lens is that I also have been experimenting with a new printing system and new papers. I mentioned a few weeks ago that I got a new Epson 1400 printer. This is a color inkjet printer that uses Epson dyes. However, a couple of the black and white inkjet gurus like Jon Cone and Paul Roark have discovered that this printer really excels at b/w when using dedicated monochrome pigmented inks. Now I’ve been hearing about how wonderful Cone’s piezography system has been for years and have really wanted to get a chance to try this out for myself. The combination of the economically priced 1400 and the great things I was hearing about piezography inks using this printer finally convinced me to take the plunge and purchase the Piezography Special Edition K6 inkset for the 1400.

The new inks arrived on Monday along with two sample packs of Cone Studio Type 1 and Type 2 papers. Normally the Piezography system for the 1400 is only available as a CIS system. I didn’t really want to use a CIS system because my wife and kids will also need to be able to swap out the b/w ink cartridges and replace them with the color ones. Luckily MIS sells a set of refillable ink cartridges for the 1400 (for how much longer I’m not sure though). This brought the cost of going to a dedicated monochrome inks to be just about $400. This is pretty steep considering that the printer itself only cost about $200. Prices for everything are just ridiculous nowadays. Yesterday I went to order 2 special pens for writing on CDs. The cost of the pens was $8, the cost to ship them to me was $9.00. I canceled the order so Icould wait ’till I was ready to order something else so I could combine shipping costs.

Filling the carts with the Piezography inks was fairly straightforward. Though I had some trouble with using the backfill adapter to suck out 1cc of ink inorder to remove air bubbles from the cartridge. I was a little worried that there might be problems with the chips on these refillable cartridges since they were all third party items. But everything worked perfectly well after installing the new carts (we’ll have to see if things go so smoothly when it becomes time to refill the carts). I ran 2 cleaning cycles on the 1400 waiting to get all nozzles firing without any gaps. This proved to be more difficult than I expected because the number 1 piezography ink is so light that its darned near impossible to see. So I ranĀ  fourth cleaning cycle and then made my first piezography print of the image at the top of this post. It came out kinda flat and with some funny coloring to the image. Well I had made the first of many mistakes in learning about printing with these new inks. The first mistake I made was trying to save a little bit of ink and time by printing at 1440 dpi. Normally with the Epson Ultrachrome inks there is not too much difference between 1440 and 2880 dpi. Not so with these inks on the 1400, according to Jon Cone the printing curve description files were made specifically with the 2880 dpi resolution as the intended target.

My next print was done at 2880 and came out looking tons better! There was a decent amount of black in the image now, and the mid tone contrast was dramatically improved, along with highlight separation. Also at this point I could see that there was a very interesting color shift in the upper mids to highs around the sun and gradually radiating through the left third of the image. I thought that this was an amazing split with warmth in the mid to upper regions and gradually going through a neutral/cooling descent into black. This wasn’t really how the inks were supposed to perform. What I was seeing was just a very lucky coincidence of the remaining yellow ink that was still in the printer, and seemed to really only show up in the areas that looked incredibly interesting around the lighter areas of the photo. That first night I probably printed at least 8 different versions of this image on several different papers and was amazed about how much the colors changed as I chaged each paper. While Piezography normally does go through subtle hue changes with different papers, that was not was not what I was seeing. I was still seeing the final remnants of the color inks that were originally in the printer.

To be continued….